PEI Air Cooled BL1 Eventing Boots CLEARANCE!

PEI Air Cooled BL1 Eventing Boots

PEI Air Cooled BL1 Eventing Boots are similar to the original PEI eventing boots but are completely wrapped in a microfiber leather. The BL1 PEI Boots microfiber leather is designed to last longer and be lighter weight than the ballistic nylon that is used on the original PEI eventing boots. The microfiber leather stretches and molds to your horses legs while retaining its originally designed shape. These PEI eventing boots are 52 grams lighter per pair and offer a bit more protection than the originals. Materials provide solid brushing protection against studs. Cleanup is easy, simply throw them in the washing machine (or under the hose) and let them hang to dry.

If you want a pair of white cross country boots, these clean up very easy due to the microfiber leather.

Improved shape: forms to the leg and around fetlock without impeding movement
Polycarbonate strike guard, double stitched so it won’t move, non restrictive (located on back of front boots, on front of hind boots). Strike guard is guaranteed for life.
Air cooled via 6 areas around tendons on both inside & outside of boot
Do not suck up water, won’t get heavy
Lightweight, FLEXIBLE – not like the competition’s similar looking boot
EVA foam lining, this is NOT neoprene and is super soft
Wrapped in microfiber leather
Super lightweight – even lighter than the Original PEI Eventing Boots

Weight

PEI BL1 Pro Eventing Boots weigh slightly less (52 grams) than the PEI Original Eventing Boots. The following weights are for the LARGE size (all other sizes weigh less)

Full set: 970 Grams (34.2 oz)

Fronts: 209 grams / boot (418 grams set of fronts, size large)
Hinds: 276 grams / boot (552 grams set of hinds, size large)

The PEI Originals size large weigh in 1022 Grams (36 oz) for a full set.

Sizing Guidelines

As sizes increase, so does the circumference of the boot. We have found the biggest challenges with fitting the PEi Xc boots on “fine boned” horses. They end up fitting in height, but not in width. A gap vs. overlap is your personal preference – we have asked many trainers and have received all different answers. Also, overlapping or below the chestnut, that depends on your preference. The more coverage the better as long as there isn’t interference in the horse’s movement. The hind boots fit HIGH up the inside of the leg – that’s by design.

X-Small (available in PEi Originals Only) 7.5 inches tall (front), 9 inches tall (hind).

Small = 14.0hh – 14.3hh. 9.5 inches tall (front), 11.75 inches tall (hind)

Medium = 15hh – 16.2hh. 9.75 inches tall (front), 14.25 inches tall (hind)

Large = 16.3hh – 17.3hh. 10 inches tall (front), 15 inches tall (hind)

Colors and Availability

We carry PEI Air Cooled BL1 Eventing Boots in black and white, small – large at our warehouse in Southern California. If you would like BL1 XC boots in brown, we can order them for you and you will save on the cost of importing & shipping. PEI BL1 boots take about a week to arrive at our warehouse and another 3-4 days to reach you. Yes, you can use a black sharpie to change the vents from blue to black 🙂

Design Changes

Feedback from our customers and from Premier Equine suggest that the PEI Eventing Boots undergo design changes at least once a year. The PEI boots we carry are from 2017.

Amerigo Aluminum Stirrups with Wide Footbed

Amerigo Aluminum Stirrups

Amerigo aluminum stirrups are equipped with a wide, aluminum footbed. These stirrups provide excellent grip in all conditions, including wet weather. They also work perfectly for all types of boots. The hole for the leathers is at a tilted 30-degree angle. This angle allows the stirrup to hang from the saddle in a correct position when compared to traditional stirrup irons. A correctly positioned stirrup is more comfortable to use, safer in the event of an emergency dismount and easier to retain. 2 pieces of aluminum make up Amerigo stirrups. Two thick bolts hold the bottom to the body.

Wide, aluminum footbed similar to many of the MDC stirrups
Great grip in all conditions, for all types of boots
30-degree angle in stirrup leather hole provides a correct stirrup position
10-ounce total weight per stirrup
4.5 inches from side to side, 2.5 inches front to back
Made in Italy, with love
Nearly identical to the Jin Stirrups that are also made in Italy

Amerigo stirrups are available in three body colors: silver, gold, and black. Regardless of the body color, Amerigo stirrups come with a black footbed. The color is pretty durable. Scratches will occur but with basic care, they will look good for years.

About Amerigo Strap Goods and Accessories

Peter Menet created and designed Amerigo Stirrups. His philosophy when designing horse products is to use the natural biomechanics of the horse and rider that help optimize the horse’s true potential. Amerigo creates and designs their accessories like the Amerigo Aluminum Stirrups, with the highest level of quality, durability, comfort, and performance available for the horse and rider.

Amerigo products begin in Italy. After, the company distributes them in the USA through World Equestrian Brands. American riders own and operate the WEB business. They give back to our sport by sponsoring multiple 3-day eventers.

Premier Equine Air Cooled Boots, Original Eventing Boots in Black

Air-Cooled-Original-Eventing-Boots-Front-Black

Premier Equine Air Cooled Eventing Boots

Premier Equine Air Cooled Boots for eventing were introduced to us by one of our favorite cross country coaches down here in Southern California. They came highly recommended for their fit, durability, and for the level of protection they offer. After a successful trial run with several pairs at Copper Meadows Eventing we decided to carry Premier Equine boots. These are the “Original” Premier Equine Eventing Boots.

Lightweight, flexible, and air-cooled via multiple vents
Double stitched durable material that won’t retain water
Lining made of EVA – slip-resistant, soft material
Memory foam type material provides contoured shape
Pressure tested polycarbonate strike guard protect tendons & cannon bone
Lifetime guaranteed strike guards
Double stitched velcro
Machine washable (cool wash, air dry)
YES – you can use a sharpie to paint the vents black if you want, it works

Air Cooled Eventing Boots

PEi XC boots air-cool through six vents that allow a constant supply of fresh air flowing past the tendons. Front vents accept cool air in the direction of travel while vents on the side allow heated air to flow through and away from the leg. Vents are small enough to prevent debris from entering boot.

Premier Equine Air-Cooled Eventing Boots

PEi Cross Country Boots Material

Premier Equine air cooled boots for cross country are made of a 2520D ballistic nylon base layer. The second layer of microfiber leather covers the tendon and fetlock area. Microfiber leather developed by Premier Equine in the UK. It as a design to be strong (technically stronger than leather), and flexible with the movement of the horse and waterproof.

The lining is made of EVA, ethylene-vinyl acetate. It’s a synthetic material that’s elastic, slip resistant and extremely durable. It’s soft to the touch and non-irritating. It does not soak up water.

Weight

A full set (fronts, hinds) of Large PEI Original Eventing Boots weigh 1022 g (36 oz).

Fronts: 221 grams/boot (442 grams set of fronts, size large)
Hinds: 290 grams/boot (580 grams set of hinds, size large)

Premier Equine Boots Sizing

The fronts follow the general guideline below. Hinds can be difficult to fit. We offer complimentary exchanges so no worries, we’ll get it right the second time. If you’re between sizes, feel free to purchase both sizes. We’ll pay the return shipping on the ones that don’t fit.

X-Small Pony Sized Cross Country Boots

(available in PEi Originals Only) 7.5 inches tall (front), 9 inches tall (hind).

Small = 14.0hh – 14.3hh. 9.5 inches tall (front), 11.75 inches tall (hind)

Medium = 15hh – 16.2hh. 9.75 inches tall (front), 14.25 inches tall (hind)

Large = 16.3hh – 17.3hh. 10 inches tall (front), 15 inches tall (hind)

Premier Equine Air Cooled Boots In The Media

PEi XC boots were featured in Eventing Nation’s article ,”Research in human athletics brings new technology to cross country boots”.

ThinLine Trifecta Cotton Half Pad With Optional Shims

ThinLine Trifecta Cotton Half Pad, Shims Optional

ThinLine Trifecta Cotton Half Pad gets its name from the three elements it’s composed of: The first is a high-quality base derived from hard wearing (tough), US grown cotton. The second element is Ultra ThinLine. This is a microscopic honeycomb type material that absorbs impact and molds to the shape of your horses back. The two elements have been cut and sewn together in a way that creates a wither profile and spine free channel allowing the ThinLine Trifecta Cotton Half Pad to lay across the horses back in a position that will avoid pressure points.

Hard wearing cotton base
Ultra ThinLine, shock absorbing, no slip top
Machine washable
Shims available for the perfect fit
Wither profile and spine free channel allowing for natural movement

Fitting for an Off the Rack or Custom Saddle

We have tried the ThinLine Trifecta Half Pad under both custom saddles, designed specifically for the horse and rider as well as one size fits most saddles. For the custom saddles, the ThinLine Trifecta Cotton Half Pad is sleek enough that it adds the impact absorption and slip resistance as designed for without altering the saddles custom fit. For one size fits most saddles, the optional shims come in really handy to help with minor saddle fit adjustments.

Measure your saddles panels and compare them to these specs below for the best fit under your saddle. The ThinLine Trifecta Half Pad should be large enough to cover your saddle’s panels.

Small Trifecta Half Pad Dimensions: The bottom cotton pad (that touches the horses back) measures 20″ along the spine and 14.5″ across the widest part of the seat. The Ultra ThinLine panels (sewn onto the top of the cotton base) measure 19.25″ long and 13.5″ across the seat.

Medium Trifecta Half Pad Dimensions: The bottom cotton pad (that touches the horses back) measures 22″ along the spine and 16″ across the widest part of the seat. The Ultra ThinLine panels (sewn onto the top of the cotton base) measure 21.75″ long and 15″ across the seat.

Large Trifecta Half Pad Dimensions: The bottom cotton pad (that touches the horses back) measures 23″ along the spine and 16.5″ across the widest part of the seat. The Ultra ThinLine panels (sewn into the top of the cotton base) measure 22.75″ long and 15.25″ across the seat.

Optional Shims: Include Front shims for wither relief, and rear shims to lift the cantle. The shims stay put without moving around in the pad. Master Saddlers carefully craft the inserts to ensure you receive the best in protection and fit.

Caring for your ThinLine Trifecta Cotton Half Pad

You can machine wash this ThinLine half pad in a front load washer if you use cold water and a mild detergent – or bleach for white pads. Set the cycle to low with the ThinLine side against itself with the cotton side exposed to the machine. We’re all about replacing defective pads. But, pads that are destroyed by your washing machine won’t be replaced for free… Maybe at a discount, because we feel for you.

Do not put in dryer, let it hang to dry.

Proudly Made In the USA

Portable Dressage Arenas

Portable Dressage Arenas

Full Size and Half Size portable dressage arenas made in the USA. The Wellington Arena is a great portable dressage arena for use at home or at a 3-day eventing facility. The dressage court is simple to set up and move, therefore, making it easy to work with when you need to drag your arena or setup for a show.

Complementary US Ground Shipping via Freight truck
- International delivery available
Pre-measured rails assure easy set-up
Enhanced block and rail system
UV stabilized PVC ensures a long life
Highly stable in windy conditions
Ribbed (not hollow) rails add strength
Replaceable dressage arena parts available

Rail Specifications

All pieces of the portable dressage arenas are UV treated, therefore making them very durable with a longer life in all weather conditions. The rails are not hollow inside, but actually ribbed. This feature makes the rails light but strong, durable, and rigid enough not to warp like many PVC pipe dressage arena designs do.

Each rail is 1 .5″ thick and 5.5″ high and measure 4 meters long. When propped up by the line cones (rail supporters), the top of the rail is at the required 12″ mark.

Dressage Arena Delivery

Your new portable dressage arena will show up via freight truck and is built to order by the manufacturing company in southern California. There is minimal assembly required and it will likely take you longer to unpack all the boxes then set up the actual court. Also, instructions on how to set up the portable dressage arenas are included with the shipment.

Dimensions & Included Parts

Regulation height arena! These portable dressage arenas come in different sizes & include everything you need to get started. When fully assembled, all rails will be at the required 12″ above the ground.

All Rails Measure: 1.5 inches thick X 5.5 inches high. Each rail is 4 meters long (157.5 inches). Each package comes with a different number of rails but all rails measure the same. Built to order. Made in the USA

Line Cones hold up the rails. Each package comes with a different number of line cones but all line cones measure the same. Combined with the height of the line cone, the rails sit 12″ above the ground. These are available for purchase separately. All line cones are made to order in the USA

Corner Cones connect rails. Each package comes with 4 corner cones, all corner cones measure the same. These are also available for purchase separately. Made in the USA. Built to order.

20 x 40 Dressage Arena Kit “Short Court”

A 20×40 dressage court is typically used at rated events for the lower levels. Known as a Short Court. This kit includes the following parts:

includes 30, 4 meter long rails
26 line cones (rail supporters)
4 corner cones (corner rail supports)

Finished assembled rail height is equal to 12 inches (regulation standard)

20 x 60 Dressage Arena Kit “Full Court”

A 20×60 dressage court is used at rated events for upper level eventers. Known as a full-court. The kit includes the following parts:

includes 40, 4 meter long rails
36 line cones (rail supporters)
4 corner cones (corner rail supports)

Finished assembled rail height is equal to 12 inches (regulation standard)

20 x 40 Economical Training “Short Court”

A great at home solution, the 10 rail training full court provides you with the framework of a short dressage court without the expense. Also good for arenas that are multi-use as the long sides are not fully connected, allowing traffic to pass through.

includes 10, 4 meter long rails
12 line cones (rail supporters)
4 corner cones (corner rail supports)

Finished assembled rail height is equal to 12 inches (regulation standard)

20 x 60 Economical Training “Full Court”

A great at home solution, the 20 rail training full court provides you with the framework of a full dressage court without the expense. Because the sides are not fully connected, it is able to be used in a multi-use arena. Traffic is able to pass through easily.

includes 20, 4 meter long rails
22 line cones (rail supporters)
4 corner cones (corner rail supports)

Finished assembled rail height is equal to 12 inches (regulation standard)

Boyd Martin Open Front Tendon Boots (Fronts)

Open Front Tendon Boots

Boyd Martin Open Front Tendon Boots are part of the Boyd Martin signature line of Majyk Equipe horse boots. The objective of the Boyd Martin stadium jump line is to provide a high quality open front boot specifically for the 3-day eventing market.

The Boyd Martin open front boots are available in fronts (tendon boots) and hinds (fetlock boots). The open front design allows the horse to feel the impact of a pole but provide protection to the leg’s soft tissue including the flexor tendons and the suspensory ligaments.

Open front design
Built exclusively for Eventing horses
Protects soft tissue from impact
Flexible, strong outer shell
Reinforced strike zones
Memory foam liners
Elastic with Tab closures

Flexible, Strong Outer Shell

The Boyd Martin open front tendon boots feature an outer shell that’s made of “Variable Hardness TPU” created by the BASF company. This is basically just plastic that is flexible (TPU stands for Thermoplastic Polyurethanes). To take it a step further, it’s an aromatic TPU, a product that can be used in applications that require flexibility, strength and toughness – perfect for horse boots that need to be flexible while being protective.

Air Shock Protection & Reinforced Strike Zones

Both the Boyd Martin stadium jumping boots (open front tendon boots and open front fetlock boots) feature Air Shock Protection & reinforced strike zones. The Air Shock protection consists of pockets within the boot that when hit, constrict and dissipate the energy away from the strike zone. The flexible TPU pops back into place after a strike. The reinforced strike zones provide an extra layer of protection in vulnerable areas.

Memory Foam Liners

Does your horse’s legs get rubbed raw by your current open front tendon boots? Try an open front boot with memory foam liners. When the boot liners warm up, the memory foam molds to the shape of your horses leg. This custom fit horse boot will not rub a shaved leg, cause any discoloration of the coat or cost you an enormous amount of money like the competition’s memory foam horse boots.

Neumann Winter Horse Riding Gloves

Winter Horse Riding Gloves

Winter horse riding gloves that won’t slip, fall apart or allow your fingers to freeze off. Neumann Tackified Genuine Leather Winter Gloves have the perfect design for the three-day rider. Born on the football field and still wielded by professional athletes all over the world, these gloves were re-engineered and repurposed as horseback riding gloves. The palm of these riding gloves is constructed with Neumann’s patented formula that permanently tackifies the leather palm for the life of the glove. The tackiness enhances during damp conditions and will remain tackified in sub zero temperatures without the need for spray-on adhesives. Lightweight material is extremely durable yet breathable.

“Tackified” leather palm won’t slip
Lightweight and durable
Breathable
Thermal Lining
Easy to clean
Small through Large
Secure, close contact fit

Cold weather horseback riding gloves feature thermal lining for extra warmth. These winter horse riding gloves come in any color, as long as it’s black. All sizes have velcro wrist closures for a secure fit.

Sizing

All sizes are for either gender.The riding gloves come in sizes S – L

Washing Your Leather Riding Gloves

Put your Neumann riding gloves horse on your hands, apply some mild soap and rub with a little water. Rinse clean and squeeze out the excess water. Lay them out flat to dry. We don’t suggest you put your summer riding gloves in the washing machine or the dryer.

Other Products:

If you like these gloves, check out the Summer version of them. Neumann keeps all of the quality with a little less heavy duty materials so your hands do not sweat themselves off in the summer heat.

Tri Zone Airlite Cross Country Boots (2015 Model)

Tri Zone Airlite Cross Country Boots

Tri Zone Airlite Cross Country Boots are Equilibrium’s new version of the well loved Tri Zone Cross Country Boots. They took all the best features of the classic and added the latest in material technology to increase flexibility, protection and breathability. The Tri-Zone Airlite XC boot is so lightweight it floats.

Won’t hold water
Flexible, tough strike plates – no solid plates
Breathable, won’t heat up the tendons
Concealed velcro, not exposed to impacts
Fresh new design for 2015

Safety Tested, Eventer Approved

Leveraging the neutrality of an independent laboratory, Equilibrium (manufacturer of Tri-Zone products) safety tested the new Airlite XC boots. Lab results proved that the Airlite XC boots protect against both threats on course: concussion and penetration. Concussions on course come from a horse striking a cross country fence at galloping speed. Threats of penetration are from a horse’s hind hoof over reaching and striking any number or tendons and ligaments on the back of the front leg. These boots protect against both these threats.

Lightweight XC Boots

Adding weight to a horses leg can significantly alter performance. On the cross country course, this alteration can also mean missing your optimum time at the least, damaging your horses leg at the worse. Equilibrium Airlite XC Boots offer a high level of performance without adding significant weight.

Highly Breathable And Flexible Without Letting Dust In

Overheating your horses tendons on course is not such a good thing. Tri-Zone uses the “Airlite System” that has three layers of perforated, flexible materials that allow air to flow while keeping dust and debris out. The outer layer is tough, flexible TPU mesh. This stuff is rip resistant and super breathable. The second layer is a highly breathable filter membrane that blocks dust and debris from the final layer. The inner layer is a shock dampening, high density material. The material has a surface mimicking that of heat sinks on electronics. Overall, the sinks dissipate heat through the multiple air vents that are built into the boot.

Kentucky Horsewear Air Tendon Boots

Kentucky Horsewear Air Tendon Boots are open front jump boots made with D30 shock absorbing materials. They’re an above basic, high quality open front boot made of a tough PU outer shell and breathable neoprene on the inside. Like all Kentucky Horse Wear horse boots, the strike zones on the boot come embedded with D30, a shock absorbing material.

Open front boots for front & hind
Velcro closure
One size fits most
Great entry level / schooling boot
This product is replacing our Roma open front boots due to quality & price point
Only equestrian boot utilizing D30, a highly effective shock absorption material

A Quality Show Jumping Boot

Want a good show jumping boot but don’t want to spend $300? Try the Kentucky Horsewear Air Fetlock / Air Tendon boots. They’re a fantastic open front boot in the $100 ish price range. We replaced the Roma open front boots with these due to the quality and price. For a mid level boot, these are the best!

Looking for something a bit more fancy? Try the Kentucky Horse Wear Aero boots!

Great Fit + Unique Impact Absorbing Strike Zone (orange strip in picture below)

Anatomically designed, the boots have a great fit, front and hind. The outer PU shell (Polyurethane, a polymer composed of a chain of organic units jointed by carbamate links) is flexible but protective. It features ventilation holes that enhance breathability, keeping legs cooler while doing your warmup and stadium round. On the inside of the jump boot there is a unique strike zone that is filled with 4mm of D30, a specially formulated impact absorbing / dampening material. D40 is used in other protective applications including high speed off road motorcycle riding.

Eventing Gear Gift Cards

Eventing Gift Cards

Eventing Gift Card are good for any product on our website. They’re also good for all special orders, pre-orders and other specials that are advertised through our emails and FB page. The equine products we carry are the best in class so you can be assured that the recipient of the gift card will find what they are looking for and that it won’t fall apart by the next gift-giving season.

Equine tack can be hard to shop for – It’s even harder to shop for someone else! Take the easy road and delegate the shopping for equine supplies by giving a gift card!

Delivered digitally or physically (your choice)
Balance tracking – you don’t have to use it all at once
No expiration
Good for what’s in stock now and in the future!

Free Shipping On All Orders Over $75

We offer equine tack gift cards in multiple denominations but suggest a card that is valued at at least $75. With a $75+ gift card towards our online tack store, you can be sure your recipient is well on their way to getting the exact type of English tack they’re looking for – without paying for shipping.

Horse Gifts For Men

Do you have a male equestrian in your life? Four Star Eventing Gear is owned by a dude 3-day rider so we understand the challenges of finding good riding equipment for guys.

Great Return Policies

When you purchase your three-day eventing equipment from Four Star Eventing Gear you can rest assured that we’ll back up the products we sell – that means we honor warranty claims from across all the brands we carry. We also exchange products that don’t fit or that just don’t work out for you. Check out our return policy for more details.

How It Works

Choose a value! $75 gets free shipping so start there 🙂 Fill out the name and email address of the recipient. Gift cards are delivered electronically with personalization that lets the recipient know you sent the gift. We can also send a physical gift card – the option is there!

Our system automatically keeps track of the balance – you don’t have to use the balance in one transaction
No expiration
Secured – can only be used by the recipient via their email & billing / shipping address
Fully transferable, if you’re into re-gifting