Product Description

Horseshoe Stud Multi Tool

Horseshoe Stud Multi Tool built in Sweden by HorseTools gives you all the tools needed to Clean / Fix / Install  or Replace Studs. The advantage to this Horseshoe Stud Multi Tool is that you will have all your tools right in your hand, no more reaching to the ground while juggling your horses hoof and the studs.

• CLEAN the hoof using hoof pick
• CLEAN stud holes using stud hole pick
• FIX damaged threading using T-tap
  • shoes should already be threaded
• INSTALL  / REMOVE studs using multiple size stud tools
• • 10mm
  • 12mm
  • 13mm
  • 14mm
• Knife – you can always use an extra knife in the tack box
• Handy carrying / storage case with loop to connect to belt – perfect for grooms managing multiple horses

Made of high quality stainless steel

What’s in it and why:

10 tools in 1! Once you have had your farrier drill and tap (and tack on) the shoes you’re going to the show with, this horseshoe stud multi tool will come in handy to clean and install whichever horseshoe studs you need for the conditions you’re riding in. Start with the hoof pick to clean out the hoof. Then, unfold the stud hole pick to remove any debris that has collected in the holes – you can also use the pick to remove cotton that you or your farrier may have stuck in the holes to prevent them from clogging up.

Tip from a Rolex groom for cleaning horseshoe stud holes: buy a spray bottle and fill it with water. It will come in handy to get the crud inside the hole wet. The wet crud will come out easier when you use the stud hole pick.

Once your stud holes are cleaned out, you can use the T-tap to improve the threads. This is not always necessary and isn’t necessary if you’re using self-tapping studs or self cleaning studs (high quality studs made of  tungsten other hardened metal).

You can use your fingers to start the studs into their holes then use one of the four stud wrenches to tighten.